# Built-in graph algorithms

Graph algorithms are a set of instructions that traverse (visits nodes of) a graph and find specific nodes, paths, or a path between two nodes. Some of these algorithms are built into Memgraph and don't require any additional libraries:

Below you can find examples of how to use these algorithms, and you can try them out in the Playground sandbox using the Europe backpacking dataset, or adjust them to the dataset of your choice.

Memgraph has a lot more graph algorithms to offer besides these three, and they are all a part of MAGE - Memgraph Advanced Graph Extensions, an open-source repository that contains graph algorithms and modules written in the form of query modules that can be used to tackle the most interesting and challenging graph analytics problems. Check the full list of algorithms.

## Depth-first search

Depth-first search (DFS) is an algorithm for traversing through the graph. The algorithm starts at the root node and explores each neighboring node as far as possible. The moment it reaches a dead-end, it backtracks until it finds a new, undiscovered node, then traverses from that node to find more undiscovered nodes. In that way, the algorithm visits each node in the graph.

DFS in Memgraph has been implemented based on the relationship expansion syntax which allows it to find multiple relationships between two nodes if such exist. Below are several examples of how to use the DFS in Memgraph.

### Getting various results

The following query will show all the paths from node `n`

to node `m`

:

`MATCH path=(n {id: 0})-[*]->(m {id: 8}) `

RETURN path;

To get the list of all relationships, add a variable in the square brackets and return it as a result:

`MATCH (n {id: 0})-[relationships *]->(m {id: 8}) `

RETURN relationships;

To get the list of path nodes, use the `nodes()`

function:

`MATCH path=(n {id: 0})-[*]->(m {id: 8}) `

RETURN path,nodes(path);

### Filtering by relationships type and direction

You can filter relationships by type by defining the type after the relationship list variable, and you decide the direction by adding or removing an arrow from the dash.

In the following example, the algorithm will traverse only across `CloseTo`

type
of relationships:

`MATCH path=(n {id: 0})-[relationships:CloseTo *]->(m {id: 8}) `

RETURN path,relationships;

Be careful when using algorithms, especially DFS, without defining a direction. Depending on the size of the dataset, the execution of the query can cause a timeout.

### Constraining the path's length

The constraints on the path length are defined after the asterisk sign. The following query will return all the results when the path is equal to or shorter than 5 hops:

`MATCH path=(n {id: 0})-[relationships * ..5]->(m {id: 8}) `

RETURN path,relationships;

This query will return all the paths that are equal to or longer than 3, and equal to or shorter than 5 hops:

`MATCH path=(n {id: 0})-[relationships * 3..5]->(m {id: 8}) `

RETURN path,relationships;

### Constraining the expansion based on property values

Depth-first expansion allows an arbitrary expression filter that determines if
an expansion is allowed over a certain relationship to a certain node. The
filter is defined as a lambda function over `r`

and `n`

, which denotes the
relationship expanded over and node expanded to in the depth-first search.

In the following example, expansion is allowed over relationships with an `eu_border`

property equal to `false`

and to nodes with a `drinks_USD`

property less than `15`

:

`MATCH path=(n {id: 0})-[* (r, n | r.eu_border = false AND n.drinks_USD < 15)]->(m {id: 8}) `

RETURN path;

## Breadth-first search

In breadth-first search (BFS) traversal starts from a single node, and the order of visited nodes is decided based on nodes' breadth (distance from the source node). This means that when a certain node is visited, it can be safely assumed that all nodes that are fewer relationships away from the source node have already been visited, resulting in the shortest path from the source node to the newly visited node.

BFS in Memgraph has been implemented based on the relationship expansion syntax. There are a few benefits of the breadth-first expansion approach, instead of a specialized function. For one, it is possible to inject expressions that filter nodes and relationships along the path itself, not just the final destination node. Furthermore, it's possible to find multiple paths to multiple destination nodes. Also, it is possible to simply go through a node's neighborhood in breadth-first manner.

Currently, it isn't possible to get all the shortest paths to a single node using Memgraph's breadth-first expansion. Below are several examples of how to use the BFS in Memgraph.

### Getting various results

The following query will show the shortest path between nodes `n`

and `m`

as a
graph result.

`MATCH path=(n {id: 0})-[*BFS]->(m {id: 8}) `

RETURN path;

To get the list of relationships, add a variable before the `*BFS`

and return
it as a result:

`MATCH (n {id: 0})-[relationships *BFS]->(m {id: 8}) `

RETURN relationships;

To get a list of path nodes use the `nodes()`

function. You can then return the
results as a list, or use the `UNWIND`

clause to return individual node
properties:

`MATCH path=(n {id: 0})-[*BFS]->(m {id: 8}) `

RETURN nodes(path);

### Filtering by relationships type and direction

You can filter relationships by type by defining the type after the relationship list variable, and you decide the direction by adding or removing an arrow from the dash.

In the following example, the algorithm will traverse only across `CloseTo`

type
of relationships regardless of the direction:

`MATCH (n {id: 0})-[relationships:CloseTo *BFS]-(m {id: 8}) `

RETURN relationships;

### Constraining the path's length

The constraints on the path length are defined after the *BFS. The following query will return a result only if the path is equal to or shorter than 5 hops:

`MATCH (n {id: 0})-[relationships:CloseTo *BFS ..5]->(m {id: 8}) `

RETURN relationships;

The result will be returned only if the path is equal to or longer than 3, and equal to or shorter than 5 hops:

`MATCH (n {id: 0})-[relationships:CloseTo *BFS 3..5]-(m {id: 15}) `

RETURN relationships;

### Constraining the expansion based on property values

Breadth-first expansion allows an arbitrary expression filter that determines if
an expansion is allowed over a certain relationship to a certain node. The
filter is defined as a lambda function over `r`

and `n`

, which denotes the
relationship expanded over and node expanded to in the breadth-first search.

In the following example, expansion is allowed over relationships with an `eu_border`

property equal to `false`

and to nodes with a `drinks_USD`

property less than `15`

:

`MATCH path=(n {id: 0})-[*BFS (r, n | r.eu_border = false AND n.drinks_USD < 15)]-(m {id: 8}) `

RETURN path;

## Weighted Shortest Path

In graph theory, the weighted shortest path problem is the problem of finding a path between two nodes in a graph such that the sum of the weights of relationships connecting nodes, or the sum of the weight of some node property on the path, is minimized.

One of the most important algorithms for finding weighted shortest paths is
**Dijkstra's algorithm**. In Memgraph it has been implemented based on the
relationship expansion syntax. In the brackets following the `*WSHORTEST`

algorithm definition, you need to define what relationship or node property
carries the weight, for example, `[*WSHORTEST (r, n | r.weight)]`

. Below are
several examples of how to use the WSHORTEST in Memgraph.

### Getting various results

To find the weighted shortest path between nodes based on the value of the
`total_USD`

node property, traversing only across `CloseTo`

relationships and
return the result as a graph, use the following query:

`MATCH path=(n {id: 0})-[:CloseTo *WSHORTEST (r, n | n.total_USD)]-(m {id: 15})`

RETURN path;

In the above example, the weight is a property of a node, but you can also use weight of some relationship property:

`MATCH path=(n {id: 0})-[:Type *WSHORTEST (r, n | r.weight)]-(m {id: 9})`

RETURN path;

To get the list of relationships, add a variable before the `*WSHORTEST`

and
return it as a result:

`MATCH (n {id: 0})-[relationships:CloseTo *WSHORTEST (r, n | n.total_USD)]-(m {id: 9})`

RETURN relationships;

To get the path nodes, use the `nodes()`

function. You can then return the
results as a list, or use the `UNWIND`

clause to return individual node
properties:

`MATCH path=(n {id: 0})-[relationships:CloseTo *WSHORTEST (r, n | n.total_USD)]-(m {id: 9})`

UNWIND (nodes(path)) AS node

RETURN node.id;

To get the total weight, add a variable at the end of the expansion expression:

`MATCH path=(n {id: 0})-[relationships:CloseTo *WSHORTEST (r, n | n.total_USD) total_weight]-(m {id: 9})`

RETURN nodes(path), total_weight;

Remember that in the case when weight is taken from the node property, the value of the last node is not taken into the total weight.

### Filtering by relationships type and direction

You can filter relationships by type by defining the type after the relationship list variable, and you decide the direction by adding or removing an arrow from the dash.

In the following example, the algorithm will traverse only across `CloseTo`

type
of relationships:

`MATCH path=(n {id: 0})-[relationships:CloseTo *WSHORTEST (r, n | n.total_USD)]->(m {id: 46})`

RETURN relationships;

### Constraining the path's length

Memgraph's implementation of the Dijkstra's algorithm uses a modified version of this algorithm that can handle length restriction and is based on the relationship expansion syntax. The length restriction parameter is optional, and when it's not set, it can increase the complexity of algorithm execution. It is important to note that the term "length" in this context denotes the number of traversed relationships and not the sum of their weights.

The following example will find the shortest path with a maximum length of 4
relationships between nodes `n`

and `m`

.

`MATCH path=(n {id: 0})-[:CloseTo *WSHORTEST 4 (r, n | n.total_USD) total_weight]-(m {id: 46})`

RETURN path,total_weight;

### Constraining the expansion based on property values

Weighted shortest path expansion allows an arbitrary expression filter that
determines if an expansion is allowed over a certain relationship to a certain
node. The filter is defined as a lambda function over `r`

and `n`

, which denotes
the relationship expanded over and node expanded to in finding the weighted shortest path.

In the following example, expansion is allowed over relationships with an `eu_border`

property equal to `false`

and to nodes with a `drinks_USD`

property less than `15`

:

`MATCH path=(n {id: 0})-[*WSHORTEST (r, n | n.total_USD) total_weight (r, n | r.eu_border = false AND n.drinks_USD < 15)]-(m {id: 46})`

RETURN path,total_weight;